DK 
France
English
Finland
German
Spanish
One component, transparent, glossy, aliphatic, polyurethane liquid membrane.
adhesion over the entire surface. It is aliphatic: No yellowing as a result of direct exposure to sunlight.
It is based on pure elastomeric hydrophobic polyurethane resin, which results in excellent mechanical, chemical, thermal, UV and natural element resistance properties.
Apply with brush, roller or airless spraying in one or two coats. Minimum consumption per coat: 0.1 kg/m2.
Recommended for UV protection of HyperCoat SB
Mix the HyperCoat SB UV Protect whit 10% of Hypercoat SB In the color that you are going to paint with Apply with brush, roller or airless spraying
in one or two coats. Do not leave more than 48 hours between coats. If applied non-pigmented, you are advised to consider whether there are any UV resistance
requirements for the substrate or surface on which it is applied.
Preparation:
When stirring (or pigmenting) take care not to introduce air in the mix, which may result in bubbling on the cured membrane. Stirring can either be done manually or with a with a low speed (300 rpm) mixer.
Recommendation: Always make a test coat to ensure the compatability of product and surface.
Cleaning: Clean tools and equipment first with paper towels and then using HyperCoat Solvent. Rollers will not be re-usable.
Shelf life: Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25 oC. Once opened, use as soon as
possible.
Safety Information: Contains volatile flammable solvents.
Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks.
Keep in mind that solvents are heavier than air so they creep on the floor.
The MSDS (Material Safety Data Sheet) is available on request.
