DK 
France
English
Finland
German
Spanish
Polyurethane liquid membrane for waterproofing & protection Reduced CO2 emissions because less energy is required for cooling.
HyperCoat SB ClimateCooler is a one component polyurethane fluid which cures with the humidity in the atmosphere. It produces a highly elastic membrane with strong adhesion to many types of surfaces. It contains a small percentage of xylol, and may be thinned with HyperCoat SB special Thinner if necessary. It is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties. HyperCoat SB CC has the coveted ClimateCooler reflective effect, reflecting up to 80% of solar infrared rays, and the roof does not heat up as much as a normally coated roof does. This means that the temperature in the premises/halls/housing where the roof is coated with HyperCoat CC will have a temperature between 5 – 10 degrees lower than with a standard roof.
Recommended for: Waterproofing and protection of: Tiles, gypsum and cement boards, polyurethane insulation foams, bathrooms, verandas and balconies, roofs, light roofing made of metal or fibrous cement, asphalt membranes, EPDM membranes, tanks, stadium stands, car parks, bridge platforms, irrigation channels.
Limitations: Not recommended for: Unsound substrates, Waterproofing of swimming pool surfaces in contact with chemically treated water.
Application prerequisites: Can be successfully applied on: Concrete, fibrous cement, mosaic, cement roof tiles, old (but well adhered) acrylic and asphalt coats, wood, corroded metal, galvanized steel. For information about other substrates, please contact our tech department. • Hardness: R28 = 15 Mpa. • Humidity: W < 10%. • Temperature: 5-35oC. • Relative humidity: < 85%.
Application procedure: See special Application Guide
Recommendation: Always make a test coat to ensure the compatability of product and surface.
Consumption: First coat: 0.7-0.9 kg/m2. Second coat: 0.8-0.9 kg/m2.
Cleaning: Clean tools and equipment first with paper and then using HyperCoat Special Solvent. Rollers will not be reusable.
Packaging: 15 kg
Shelf Life: Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25 oC. Once opened, use as soon as possible.
Safety Information: Contains volatile flammable solvents. Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks. Keep in mind that solvents are heavier than air so they float near the floor. The MSDS (Material Safety Data Sheet) is available on request.
